Getrag 7DCL750 CCP Rebuild Kit

The Clutch Control Pack is one of the most critical components in the Getrag 7DCL750 transmission. Because it manages hydraulic pressure for both clutch packs. Any degradation in its seals or sensors directly affects shift quality and can generate persistent fault codes. When those faults appear, many owners face quotes exceeding $8,000 for a full CCP replacement. The Getrag 7DCL750 CCP Rebuild Kit from Hollywood Mechanic gives you a far more cost effective path, restoring the CCP to proper function using premium, authentic components at a fraction of that cost.

This kit is specifically designed to resolve pressure faults in the CCP when the electrical wiring and solenoid activations are confirmed to be in proper working order. Since the seals and pressure sensors are the most common failure points, replacing them with the components in this kit directly addresses the root cause of those faults. Every rubber seal in the kit is manufactured from DCT oil resistant Viton. That is a premium fluoropolymer elastomer that withstands the heat, pressure, and chemical environment inside the gearbox far better than standard rubber alternatives.

Hollywood Mechanic recommends rebuilding the CCP every ten years regardless of mileage. This is because the seals degrade over time from heat cycling and fluid exposure. Waiting for a fault to appear means the transmission has already been operating under compromised conditions. A proactive rebuild using this kit keeps the CCP in peak condition. It prevents the kind of pressure loss that leads to clutch wear and more expensive repairs down the line.

Since accessing the CCP requires significant disassembly, we strongly recommend replacing the temperature sensor module during this rebuild. The temperature sensor has a high failure rate, and the labor required to replace it separately is nearly identical to the labor already invested in this repair. By replacing it now, you avoid a costly return visit. A discounted temperature sensor is available separately and is listed below the product as an add on.

The Getrag 7DCL750 CCP Rebuild Kit includes:

*All rubber seals are manufactured from DCT oil resistant Viton for maximum durability and longevity.

Please select your application from the drop down menu before adding to cart. Most Ferrari models equipped with the Getrag 7DCL750 will use the E-Diff option. The Ferrari California is the exception and does not use the E-Diff configuration. For Mercedes and Ford vehicles, please select based on your specific vehicle option.

We recommend purchasing the Axle Bolt Hardware Kit alongside this rebuild kit. Because the axle bolt hardware is encountered during this repair, replacing those fasteners at the same time is best practice and prevents future issues. We made this a dropdown option in this listing for your convenience.