Getrag 7DCL750 Transmission Synchros

The Getrag 7DCL750 Transmission Synchros set is the most comprehensive mechanical repair available for the 7DCL750 gearbox. It contains every synchronizer ring and every shift collar in the transmission. When these components wear beyond their service limit, the gearbox develops synchronizer EOL faults. These faults do not resolve with software updates or fluid changes. So the only correct repair is a full synchronizer replacement. This set is the OEM solution for that repair.

The Getrag 7DCL750 is a dual clutch transmission. Because it uses two clutch packs and a complex gear selection system, the synchronizers carry significant load during every gear change. Over time, the synchronizer rings and shift collars wear down. When they reach the end of their service life, the transmission control unit logs synchronizer EOL faults. These faults indicate that the mechanical components can no longer perform their function reliably. At that point, the gearbox needs this part set. There is no alternative.

This set contains all the synchronizer rings and shift collars for the Getrag 7DCL750. Because it is the complete set, every gear position is covered in a single purchase. This is important for high mileage gearboxes since the wear is rarely limited to a single gear position. When one synchronizer reaches EOL, the others are typically close behind. So replacing the complete set during a single disassembly is the correct approach. It eliminates the need to open the gearbox again for the same repair.

This part set is not available for public purchase through the dealer network. We source it directly from Ferrari, brand new, at the official list price. There is no markup. The price you see is the same price we pay. We offer it this way because the goal is to make the correct OEM parts accessible to the technicians and owners who need them. Aftermarket alternatives exist for this application, but they do not meet the same specification as the OEM set.

This is one of the most technically demanding jobs on the Getrag 7DCL750. It is second in difficulty only to replacing the pinion. Because of that, it requires a specially trained transmission technician. It also requires the correct special tools to access and install the synchronizer assembly. Attempting this repair without the proper tools or training will result in damage to the gearbox. We strongly recommend pairing this set with the full repair kit. That kit contains all the seals and hardware needed to complete the installation. Together, they resolve all existing faults and protect the gearbox from future failures in a single service event.