Getrag 7DCL750 Engine Stand Adapter Set
The Getrag 7DCL750 Engine Stand Adapter Set solves the most fundamental challenge in 7DCL750 bench repair. You need to hold the gearbox securely while rotating it into the correct position for each stage of the job. This set gives you exactly that. It contains two custom adapters that bolt directly onto the gearbox case. Once you mount the gearbox on a standard engine stand, you can rotate it freely to any position. That changes how you work. Instead of moving around a static gearbox, you rotate the gearbox to you.
How the Adapters Work
Each adapter bolts onto a specific mounting point on the 7DCL750 case. Together, the two adapters create a balanced two-point mount on the engine stand. Because you support the gearbox at two points, it stays stable at any rotation angle. You can rotate the unit to access the top, bottom, front, or rear without removing it from the stand. That access matters most during seal replacements, bearing swaps, and hardware jobs.
Midplate Transfer and Speed Sensor Case Removal
This adapter set also enables midplate transfer. To remove the speed sensor case, you first need to transfer the midplate. Because the adapters hold the gearbox securely, you can perform that transfer without the unit shifting or losing its position. That stability makes the step straightforward. Without a secure mount, you need a second technician to hold the gearbox or you need additional blocking equipment. This set eliminates both of those workarounds.
Why You Need This Tool
The 7DCL750 is a heavy and asymmetric gearbox. Without a dedicated mount, you end up propping it on the bench and repositioning it manually for each step. That approach is slow and creates risk of the gearbox shifting mid-repair. This adapter set removes all of that uncertainty. You mount the gearbox once, and then you rotate it as needed throughout the entire job. Every repair step becomes faster and more precise because you control the position of the unit at all times.
Compatible Vehicles
The Getrag 7DCL750 is used in the Ferrari 458, 488, Ferrari FF, GTC4 Lusso, Mercedes AMG GT, and Ford GT. This adapter set fits all 7DCL750 applications. Contact us before ordering if you need to confirm compatibility for a specific variant.
Features
- Two custom adapters that bolt directly onto the 7DCL750 gearbox
- Mounts the gearbox on any standard engine stand for secure bench repair
- Rotate the gearbox to any position to access any repair area
- Enables midplate transfer required for speed sensor case removal
- Eliminates improvised blocking and secondary support
- Required tool for any technician performing a full 7DCL750 rebuild
- Two point mounting keeps the gearbox stable at any rotation angle
- Fits Ferrari 458, 488, FF, GTC4 Lusso, Mercedes AMG GT and Ford GT
- Weighs 20 lbs to handle the asymmetric load of the 7DCL750
- Designed and used in our own shop
Reviews
There are no reviews yet.